Candidates will be stationed onsite mill floor.
Candidates have to erect winding & open ended spinning machines.
Commissioning of winding & open ended spinning machines.
Servicing of winding & open ended spinning machines.
Trouble shooting for winding & open ended spinning machines and technology.
Candidate should also have knowledge on the following machines from Truetzschler & Schlafhorst Saurer
Truetzschler carding machines – DK 740, DK 760, DK 803, DK 903, TC 03, TC 07, TC 11
Truetzschler blowroom lines
Truetzschler TD 03, TD 08, draw frames
Schlafhorst Saurer BD 330, BD 350, SE 7, SE 8, SE 9, ACO 240, ACO 312 Open End spinning Machine

Experience – 2 to 7 Years
Work Location – Russia
No.of Position – 18
Travel – 10%
Preference – Russian Nationality

Provide technological support to customer during commissioning of individual machines and complete systems.
Should have complete knowledge on the Following Rieter Machines.

Rieter blowroom lines
Rieter C 50, C 51, C 60, C 70 carding machines
Rieter RSB 851, RSB 951, RSB D30, RSB D35, RSB D40, RSB D45 drawing frames
Rieter Ring frames
Rieter BT 903, BT 904, Rieter M1, R1-4644

Analyze technological problems and seek solutions to the customer on the mills. 
Briefing and instructing the mill personnel to carry out problem solving methods.
Technological optimization of Rieter machines in the process line. 
Annual contract warranty inspections 
Technological sales support 
Assist in experiments and overhaul the spinning machines

Experience – 5 to 10 Years
Work Location –  Russia
No.of Position – 9
Travel – 10%
Preference – Russian Nationality.

Assist Senior Service Engineer in Installation & maintenance of textile machineries
Able to manage first level support
Should have a flair of Customer service
Candidates should have basic knowledge of Electrical, Electronics & Mechanical instruments
Candidates should be ready to perform 60% of Physical activity on Machinery.
Candidate with knowledge on any of the following machinery will be given preference.

Terrot 
Monarch 
Murata Vortex Airjet spinning machines
Mayer & Cie circular knitting machines
Lonati socks knitting machinery
Bruckner stenter frames
Monforts saniforizing machine
Thies & Thien dyeing machines
Zimmer rotary printing machinery
Reggiani flat bed printing machinery

Experience – 0 to 2 Years
Work Location – Bulgaria & Russia
No.of Position – 18
Travel – 80%
Preference – Russian, Bulgarian Nationality

Minimum of 10 Years experience as Senior Service Technician
Should have in depth technical knowledge on any of the following product range

Elitex OE RCE, BD 200 RN, BD 200 SN, BD D30, BD 200D
Circular Loom & Needle (Webbing) Looms.
Zinser Ring Frames
Sulzer Looms Tw 11, PU, P7100, P7200, P7300 Projectile looms
Picanol Gamma, Gammax, Optimax looms
Dornier rapier & airjet Looms
Somet looms
Van de Wiele looms
Vamatex looms

Manage a team of 30 Service Engineers
Plan and manage daily maintenance activities and prepare Monthly Service Reports.
Execution of break down in time with running equipment.
Check for all Contracts. In-depth knowledge to conduct workshop to Service Technicians.
Manage overall maintenances and Service Technicians Career progression and perform annual appraisal.

Experience – 10 to 15 Years
Work Location – Monterrey – Mexico, Sao Paulo – Brazil, Bogota – Colombia, Buenos Aires – Argentina
No.of Position – 8 (2 Candidates per location)
Salary – 4000 US$ to 7500 US$
Travel – 40% across South America.
Preference – Read, Speak and Write in Spanish, Portuguese, French.

Sample preparation for different test parameters
Testing of samples as per international test methods
Evaluation of samples with reference to the different protocols
Check the quality of the results compiled
Co ordinate with different sections for any clarifications

Key Deliverables :

Effective implementation of buyer test protocols of testing. 
Responsible for issuing reports with highest precision.
Consistency in both the qualitative and quantitative analysis.
Training Technical Asst. for specimen preparation and chemical analysis as per test specifications.
Error free test results reporting and implementation and maintaining buyer protocols.

Technical Skills Desired:

Technical knowledge about the Textile products testing. 
In-depth knowledge on textile manufacture fiber to garment.
Exposure to international testing methods.
Skills on handling testing equipment’s like Uster, Textest, Lawson Hemphill, Keisokki, Testrite, Standberg, Tomsic, Hornik, Wira Testing machines

Experience – 2 to 5 Years
Work Location – Tunisia, Egypt, Morocco
No.of Position – 4
Travel – 10%
Preference – Local Candidates.

Accountabilities & Responsibilities – Production

Producing quality products 
Reducing the cost of conversion through effective utilization of resources. 
To reduce scrap and down grade. 
Mill floor management for effectiveness 

Maintenance
Ensure effective maintenance of Twisters, Loom, and Dipping machines 
Reducing maintenance down time 
Reducing maintenance cost 

Customer Satisfaction
Achieving the exact requirement of the customers in terms of QC. 
Satisfying the customer needs with consistent quality products 

TQM & Quality Systems

Promote TQM principles and habits in the workplace. 
To make all members capable and to participate in improvements. 
Assuring Safety, Health and environment in the work place. 
Focus on global best practices to improve the human capability and safe working in mill floor. 

Deliveries

Production planning to meet the delivery schedules. 

Project

Ensure execution of project as per activity plan and cost allocated.

Experience – 20 to 25 Years
Work Location – Ghana
No.of Position – 2
Salary – 3000 US$ to 5000 US$
Travel – 15%

We have multiple openings across European Union, Scandinavia, Russia, Peru, Mexico, USA, Canada, Australia, South Africa, Kenya, Nigeria, Egypt, Japan, South Korea, China, Taiwan, Vietnam, Bangladesh and India.

Candidates with 0-10 Years’ experience in providing Offset Printing machine technical service in any of the following Offset Printing Machinery range can send us your accomplishments. We will evaluate and contact the shortlisted candidates.

No.of Position – Multiple positions across geography
Travel – 10 – 40%
Preference – Local Candidates.
Salary – 500 US$ to 4500 US $